MODULAR
STEELWORK SOLUTIONS
Section Connectors

Beam Section Holder TPH F 100

Application

Interface element to connect 90° intersecting Beam Sections F100. Alternatively the Beam Section Holder TPH may be used to connect only one beam section to an even surface with suitable wall anchors or with cast-in channel accessories.

Installation

Connecting one Beam Section F100 90° to another one by using 6 x Self Forming Screw FLS applied through all elongated holes. Connecting to any other surface or member by using 2 x Self Forming Screws FLS through the two elongated holes on the top of the Beam Section Holder TPH F100 plus 2 appropriate fixing elements up to M12 through the two holes “d1”.

Technical Data

Type
L x b x s
[in]
ø d1
[in]
Elongated slot LL(1)
d x a [in]
Elongated slot LL(2)
d x a [in]
TPH F 100 C 8 5/8" x 3 15/16" x 1/6" 9/16" 7/16" x 13/16" 7/16" x 13/16"
TPH F 100/80 C 7 13/16" x 3 15/16" x 1/6" 9/16" 7/16" x 13/16" 7/16" x 13/16"

Type
L x b x s
[mm]
ø d1
[mm]
Elongated hole LL1
d x a [mm]
Elongated hole LL2
d x a [mm]
TPH F 100 C 219 x 100 x 4 14 11 x 20 11 x 20
TPH F 100/80 C 199 x 100 x 4 14 11 x 20 11 x 20

Typ
Fx [kN]
Fy [kN]
Fz [kN]
My [kNm]
Mz [kNm]
TPH F 100 C 6,2 12,7 12,3 0,6 0,5
TPH F 100/80 C 6,2 12,7 12,3 0,6 0,5

Die angegebenen Lastwerte sind zulässige Lasten und beinhalten die Teilsicherheitsbeiwerte γM2 = 1,25 (DIN EN 1993-1-8:2010-12, Tab. 2.1) sowie γG = 1,35 (DIN EN 1990:2010-12, Tab. A1.2(B)) für ständige Einwirkungen.

Material:
Steel, HCP
TypeW
[lb]
W
[kg]
Quantity
[pack]
Part
number
TPH F 100 C2.651.210 113084
TPH F 100/80 C2.201.010 113085