Beam Connection LKA
Application
Connecting assembly for the direct attachment of rod hanger assemblies to beam sections with a flange width 3 15/16" (100-310mm). The pre-welded Eye-Plate which is fastened to the siFramo80/30 section serves as a basic element for the connection of the Rod Hanger Load Chain Assembly LKV in sizes 3/8" (M10) up to 5/8" (M16) rod and Pipe Clamps type Stabil Form C LK.
Scope of delivery
1 Beam Section siFramo 80/30 (see length variants in table below) with pre-welded siFramo Eye-Plate HP F 80
2 U-Holders SB F 80/30-40
Installation
Connect the Beam Section siFramo 80/30 length with pre-welded siFramo Eye-Plate HP F 80 to the underside of the existing steel beam by means of the U-Holders SB F 80/30-40.
Tightening torque for the U-Holder clamps : 29.50 lbf/ft(40 Nm)
Type A: Load Chain runs crosswise to the beam
Type B: Load Chain runs longitudinally to the beam
Technical Data
Max. perm. tensile load according beam width:
Type | 3 15/16" - 7 13/16" | 7 14/16" - 12 3/16" mm |
---|---|---|
M10 | 2.45 kip | 2.43 kip |
M12 | 2.59 kip | 2.54 kip |
M16 | 2.72 kip | 2.68 kip |
Type | 100 - 199 mm | 200 - 310 mm |
---|---|---|
M10 | 10.9 kN | 10.8 kN |
M12 | 11.5 kN | 11.3 kN |
M16 | 12.1 kN | 11.9 kN |
The implementation and construction requirements of the components, their design as well as their verifications and load tests were carried out following the standards VGB R 510 L part I, KTA 3205.3 and DIN EN 13480-3.
Beam width [in] | L [in] | B [in] | H [in] |
---|---|---|---|
100 - 160 | 11 13/16" | 3 2/16" | 1 3/16" |
161 - 310 | 17 5/16" | 3 2/16" | 1 3/16" |
Beam width [mm] | L [mm] | B [mm] | H [mm] |
---|---|---|---|
100 - 160 | 300 | 80 | 30 |
161 - 310 | 440 | 80 | 30 |
Material: | Steel, HCP |