MODULAR
STEELWORK SOLUTIONS
Section Connectors

Pivot Joint GE F - ST F 100

Application

Applicable as a bracing element for single-arm cantilevers supported from primary steelwork or concrete surfaces, also for the knee-brace reinforcing of all siFramo 100 frame constructions. The pivot can be installed with angles from 25° to 155°.

Scope of delivery

Pivot Joint GE F - ST F 100 with pre-attached base plate

Installation

Attachment of the Joints to steel structure by means of Assembly Set MS 5P M12 S while connecting the base plate. Ab Typ 161/200 erfolgt die Befestigung über das Montageset MS 5P M16 S. Another option is to fix the Joint to concrete walls by means of 4 heavy-duty anchors M12. The support profile TP F 100 plugged onto the octagon is attached by means of 4 Self Forming Screws. The cutting length of the support profile can be determined by the table below-mentioned. After installation at the desired angle the screws have to be tightened with 29.50 lbs/ft (40 Nm).

By loosening the screw connection between Joint and Joining Plate it is possible to rotate the Joint by 90° and to use it for a cross member then (see figure 4).

Technical Data

Typ
Height H
[in]
Length L
[in]
Width B
[in]
Angle α
GE F 80/120 - 100 7 1/16 8 11/16 8 11/16 25° - 155°
GE F 121/160 - 100 - 1 7 1/16 12 10/16 10 4/16 25° - 155°
GE F 161/200 - 100 - 1 7 1/16 12 10/16 12 3/16 25° - 155°
GE F 201/310 - 100 - 1 7 1/16 8 11/16 16 9/16 25° - 155°

Typ
Height H
[mm]
Length L
[mm]
Width B
[mm]
Angle α
GE F 80/120 - 100 180 220 220 25° - 155°
GE F 121/160 - 100 - 1 180 320 260 25° - 155°
GE F 161/200 - 100 - 1 180 320 310 25° - 155°
GE F 201/300 - 100 - 1 180 220 420 25° - 155°

Material:
Steel, HCP
TypeW
[lb]
W
[kg]
Quantity
[pack]
Part
number
GE F 80/120 - 100 *15.216.91 115863
GE F 121/160 - 100 - 123.1510.51 115864
GE F 161/200 - 100 - 126.2411.91 115866
GE F 201/310 - 100 - 124.4711.11 115868